Replacing Your Bug Zapper Globe

Please scroll down to locate your bug zapper by brand title and model kind and comply with our directions on how you can exchange your bug zapper globe. At no time are you ever to remove the hood or cage of the bug zapper to replace the globe. This may then permit access to stay components and void warranty. Which is your Bug Zapper? Click the hyperlinks below to seek out the directions for that exact bug zapper. 1. Unplug your Bug Vac and take away from its mounting place. 2. Resting your Bug Vac on a steady floor remove the water draw from the entice. 3. Remove the lens by locating the hole at the bottom of the lens in the centre, use your fore finger and thumb to squeeze the empty drawer holder collectively and thoroughly slide a thin steel object. 4. Gently angle the article behind the lens to raise the centre and launch the left tab by sliding the lens to the best.



Repeat by sliding the lens to the left to launch the correct tab. 5. Twist the globe to open the lamp holder to remove the lamp. 7. Twist the brand new globe into place to close the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding hole and repeat with the fitting tab. 9. Secure the lens by pushing it downwards, you'll really feel it click on into place. 10. Replace the drawer full of water and a number of other drops of detergent. 11. Plug your bug zapper into the ability socket and the globe ought to mild up. Following steps 1-5 examine the globe is safe in the lamp holder and change plastic cover. Use genuine yard guard substitute lamps in your bug zapper. In case you have followed these steps and your zapper nonetheless won’t light up, please contact us. 2. Holding your bug zapper, turn it the other way up so the hood is going through away from you.



3. Access the sunshine by locating the lever in the centre of the bug zapper light zapper and pull with your finger in the direction of you. 4. The bulb cover will open and you'll have the ability to entry the alternative globe. 5. Gently pull at the globe to remove it from the lamp holder. 8. Replace plastic cowl on the underside of the bug zapper for patio zapper and safe by again pulling the lever in direction of you after which releasing as soon as the cowl has closed securely. 9. Plug your Zappify Bug Zapper shop zapper into the facility socket and the globe should gentle up. Following steps 1-four examine the globe is safe within the lamp holder and substitute plastic cowl. You probably have adopted these steps and your zapper still won’t light up, please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is facing away from you. 3. Access the sunshine by locating the lever within the centre of the bug zapper and pull along with your finger in direction of you.



4. The bulb cowl will open and you'll be able to access the replacement globe. 5. Gently pull at the globe to take away it from the lamp holder. 8. Replace plastic cowl on the underside of the bug zapper and secure by again pulling the lever in direction of you after which releasing as soon as the cowl has closed securely. 9. Plug your bug zapper into the power socket and the globe should light up. Following steps 1-4 examine the globe is secure within the lamp holder and change plastic cowl. When you have adopted these steps and your zapper still won’t light up, Zappify Bug Zapper shop please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is facing away from you. 3. Using a phillips head screwdriver remove the 2-three screws situated on the underside of the bug zapper. 4. Remove the plastic cowl sealing the bug zapper globe in place.